Monday, August 11, 2014
09 Plaster Production Molds Nº 105
I make a template for cutting out the oil-clay build-up. I start by tracing the outline of the lower leg with a pencil and a square. Click on any image to enlarge it.
Next I connect the dots. Then I trace a line about 3mm larger all around. This is the line I will cut.
I use scissors to cut out the profile of the lower leg. I also trimmed the cardboard to 5x10 inches. There is about 1.5 inches all around the leg. That is how thick the plaster mold will be.
Links To BJD Tutorials
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.